Welcome To Hebei Jiaoyang Wire Mesh Machine Co., Ltd.                    weldingmachine@jiaoyangen.net          +86-13932830858
You are here: Home » News » Product Knowledge » Working principle of reinforced mesh welded wire mesh machine

Contact Us

Add: no.28 weier road,eastern industrial         zone,anpingcounty,hebei 
E-mail:
weldingmachine@jiaoyangen.net
Tel: +86-318-7063110

Working principle of reinforced mesh welded wire mesh machine

Views:0     Author:Site Editor     Publish Time: 2018-12-09      Origin:Site Inquire

The reinforced mesh welded machine adopts a highly integrated integrated control system.The average daily welding capacity can reach 600 steel meshes.The structure is simplified and the operation is convenient.

The performance of the reinforced mesh is greatly improved, the probability of failure is reduced, and various specifications are met.The welding requirements of the sheet and the smooth welding are recognized by the user.

Matters needing attention in the use of reinforced mesh welded machine:

1.When the stressed steel bar of the welded mesh is HPB235 steel bar, if the welded mesh piece is only subjected to one direction of force,the intersection of the main reinforced bar and the two transverse reinforced bars at both ends must be welded;if the welded mesh is in two directions Under the force,all the intersections of the two steel bars at the peripheral edge must be welded, and the remaining intersections can be welded or tied and welded between the phases.

2.When the stressed steel bar of the welded mesh is cold drawn low carbon steel wire,and the distance between the reinforcing bars in the other direction is less than 100mm,all the intersections of the two main transverse bars of the stressed main rib and the two ends must be welded,the middle part The solder joint distance can be increased to 250mm.

reinforced mesh welded machine

Reinforced mesh welded machine control system:

With Panasonic PLC automatic control system,with touch screen input,the operation is intelligent and simple.

Weft blanking mechanism:The stepping motor drives the disc device to automatically blank the material,and the single single drop makes the weft wire more accurate.

The reinforced mesh welded machine adopts power electronic synchronous control technology,the control system adopts PLC programmable controller,the operation interface adopts touch screen and button control,the working mode is simple,the operation is more intelligent and humanized.

The mesh welded wire mesh machine adopts servo motor to drive the pneumatic clamping and pulling device. The size of the net is more precise,the size of the net is touch screen input,and a variety of weft spacing can be set on the same net to bring flexibility and convenience to customers.Continuous; continuous reciprocating drawing net can realize the production of extended size mesh.


Product Inquiry
Hebei Jiaoyang Wire Mesh Machine Co.,ltd.
Add: no.28 weier road,eastern industrial zone,anpingcounty,hebei 
Email:
weldingmachine@jiaoyangen.net
Tel: +86-13932830858
Copyright
 2017 Hebei Jiaoyang Wire Mesh Machine Co., Ltd.  All rights reserved.
Support by 
Rongchuangmedia  
sitemap.xml

Quick Navigation

Product Category