Welcome To Hebei Jiaoyang Wire Mesh Machine Co., Ltd.                    weldingmachine@jiaoyangen.net          +86-13932830858
You are here: Home » News » Common fault phenomenon and quick treatment » Wire mesh welding machine is not welded

Contact Us

Add: no.28 weier road,eastern industrial         zone,anpingcounty,hebei 
E-mail:
weldingmachine@jiaoyangen.net
Tel: +86-318-7063110

Wire mesh welding machine is not welded

Views:0     Author:Site Editor     Publish Time: 2018-12-16      Origin:Site Inquire

Fault phenomenon 2:The wire mesh welding machine has normal no-load debugging, no welding output when welding, and the work is not welded.

Causes and troubleshooting of the fault: Generally there are several situations, please refer to the electrical schematic for maintenance.

1.The welding controller of the soldering resistance controller responsible for controlling the welding output is not turned on; 2.The welding time setting is adjusted too short; 3.The welding heat setting is adjusted too small; 4.The welding transformer contact group has poor contact or the adjustment gear is too low.5.The welding controller input and output terminal screws are loosely contacted.


Product Inquiry
Hebei Jiaoyang Wire Mesh Machine Co.,ltd.
Add: no.28 weier road,eastern industrial zone,anpingcounty,hebei 
Email:
weldingmachine@jiaoyangen.net
Tel: +86-13932830858
Copyright
 2017 Hebei Jiaoyang Wire Mesh Machine Co., Ltd.  All rights reserved.
Support by 
Rongchuangmedia  
sitemap.xml

Quick Navigation

Product Category