Wire Straightening And Cutting Machine
Introduction and Applications:
1.High-speed steel straightening cutting machine, the core components of the straight-length shear using pneumatic clutch control, shear speed, steel scratches small.Machine design more humane, the use of Soft Starter and other high-end products, the operation more simple
2.It is used to straighten and cut steel bars into customized length. The straingtened rebars can be directly used in constructional engineering.
1.This machine has national patent ( Patent No: ZL201410807476.6 ).
2.Material the machine can process are cold or hot rolling coils.
3.The straightening main engine is composed of the grab wire device, straightening device, cutting device and power transmission mechanism
4.With safety shield and safety detection switch, the main engine can not be started when the shield is open
5.The payoff reel is welded with metal sheet and the carrying capacity is 3t.
6.The bottom of the support shaft is equipped with pneumatic brake device, according to the actual situation limit the payoff reel speed. When the main engine stops, the payoff reel will stop immediately
7.High speed of straightening and high accuracy (can be ±1mm); it is easy to operate, only need one person to control one more machines.
8.Wires cutting adopts pneumatic clutch control system which has higher speed and less scratch.
1.Payoff 2.Safety 3.Main straighten and cut machine 4.Support of wire
Wire fallen device(6-12mm) Straightening roller Wire cut device
Wire buffered roller Wire picker(3-6mm) Wire picker(6-12mm)
Wire Straightening And Cutting Machine Video
Installation and training:
Our company is responsible for equipment installation and commissioning and after-sales service, and technical staff assigned to the scene to install the guidance and debugging work, and customer equipment operation and maintenance of on-site training.
1.In strict accordance with the Jiaoyang provided equipment manuals for operation and maintenance.
2.In strict accordance with the requirements prepare the installation site.
3.Provide the power and water to meet the requirements.
4.Equipment should be used in the workshop, the working environment will directly affect the performance and service life of equipment.
Precautions For Use：
1.Before use, check the power connection is solid
2.Welding machine shell must be grounded, the ground is not wet;
3.Adjust the secondary voltage according to the wire diameter, the power switch is turned on;
4.Do not touch the charged body to prevent shock and burn;
5.Check the welding head, spring, rod for damage and loose, timely recovery and repair;
6.After the end of each class to check the electrical control components are normal, such as damage should be replaced and repaired;
7.Mechanical transmission components damaged timely repair. Electrical control section as soon as possible with the manufacturer.
8.Do not open the control box when power is on, do not allow to touch the internal components by hand, to avoid electric shock
9.When checking the internal wiring and control panel wiring, be sure to cut off the power.
10.Do not touch the components inside the control panel, otherwise the components may be damaged.
11.The control box connected to the use of cooling water and ensure adequate flow of cooling water and pressure. Check the cooling system regularly.
12.Regularly (once a month) check the power box wiring.
Equipment warranty for one year, part of the life of equipment maintenance procedures, wearing parts and electronic parts are not covered under warranty.
Equipment failure I will reply within an hour, the first time to the customer site for maintenance
After the warranty, our company provides lifelong after-sales service support, as well as preferential prices to provide equipment components.