Welcome To Hebei Jiaoyang Wire Mesh Machine Co., Ltd.                    weldingmachine@jiaoyangen.net          +86-318-7063110
You are here: Home » News » Common fault phenomenon and quick treatment » When the semi-automatic welding mesh machine is used in winter,the mesh is easy to be broken.

Contact Us

Add: no.28 weier road,eastern industrial         zone,anpingcounty,hebei 
E-mail:
weldingmachine@jiaoyangen.net
Tel: +86-318-7063110

When the semi-automatic welding mesh machine is used in winter,the mesh is easy to be broken.

Views:1     Author:Site Editor     Publish Time: 2018-12-30      Origin:Site Inquire

Fault phenomenon 16:When the semi-automatic welding mesh machine is used in winter,the main cylinder is not lifted or the lifting speed is too slow,and the netting hook of the welding mesh pulls the mesh.

Causes and elimination of the fault:Because the ambient temperature of the workshop is relatively low, the moisture in the compressed air can not be well filtered by the oil-water separator,which causes the water in the main solenoid valve body of the welding mesh machine to affect the movement speed of the spool.

Solution:1.Add a cold dryer and a vertical gas storage tank to filter the moisture in the compressed air as far as possible before entering the welding net machine;2.Add an electric heating device near the main solenoid valve body of the welding mesh machine to improve the ambient temperature near the air source treatment component and the main solenoid valve,and try to reach the minimum use temperature of the welding mesh machine 5-40 degrees Celsius.


Product Inquiry
Hebei Jiaoyang Wire Mesh Machine Co.,ltd.
Add: no.28 weier road,eastern industrial zone,anpingcounty,hebei 
Email:
weldingmachine@jiaoyangen.net
Tel: +86-318-7063110
Copyright
 2017 Hebei Jiaoyang Wire Mesh Machine Co., Ltd.  All rights reserved.
Support by 
Rongchuangmedia  
sitemap.xml

Quick Navigation

Product Category