Views:0 Author:Site Editor Publish Time: 2018-12-15 Origin:Site Inquire
Fault phenomenon 1:Welded wire mesh machine no-load debugging is normal,welding will stop working
Causes and elimination of faults:The occurrence of such faults is generally caused by insufficient power supply.When the no-load debugging,the grid voltage is basically normal.When the normal welding is performed,the grid voltage is too low due to the rapid increase of the power consumption current.Ensure the normal operation of components such as programmable controllers and welding controllers.
Treatment method:fundamentally solve the power supply problem,the minimum voltage limit during the welding process of the welded wire mesh machine can not be lower than the minimum voltage capacity required by the equipment.