Welcome To Hebei Jiaoyang Wire Mesh Machine Co., Ltd.                    weldingmachine@jiaoyangen.net          +86-318-7063110
You are here: Home » News » Common fault phenomenon and quick treatment » There is a difference in the edge of the mesh welded by the wire mesh welded machine

Contact Us

Add: no.28 weier road,eastern industrial         zone,anpingcounty,hebei 
E-mail:
weldingmachine@jiaoyangen.net
Tel: +86-318-7063110

There is a difference in the edge of the mesh welded by the wire mesh welded machine

Views:1     Author:Site Editor     Publish Time: 2018-12-22      Origin:Site Inquire

Fault phenomenon 8:The difference between the left and right edges of the welded wire mesh of the wire mesh welded machine is relatively large.

Causes and elimination of the fault:The reason for the above problem is that the position of the weft positioning magnet frame has moved during the welding work.At this time,it is necessary to appropriately adjust the front and rear direction according to the deviation of the positioning magnet holder on both sides,and the adjusted weft the positioning magnet frame must be guaranteed to be a line.At the same time,the connecting screw must be tightened.Otherwise,the welded mesh weft wire is not straight,and the displacement will be displaced after a period of use,which will not ensure the consistency of the welded mesh.


Product Inquiry
Hebei Jiaoyang Wire Mesh Machine Co.,ltd.
Add: no.28 weier road,eastern industrial zone,anpingcounty,hebei 
Email:
weldingmachine@jiaoyangen.net
Tel: +86-318-7063110
Copyright
 2017 Hebei Jiaoyang Wire Mesh Machine Co., Ltd.  All rights reserved.
Support by 
Rongchuangmedia  
sitemap.xml

Quick Navigation

Product Category