Poultry Cage Machine
Introduction and Applications：
1.It’s compact in structure,easily to operate and with fully functions.
2.It's used to manufacture animal cage mesh.
1.Cross wires are pre-cuuting and straightening wire,and line wires are coil wire. It could weld wire mesh sheets and rolls continuously.
2.Main structure of welding machine is the main part that will pressurized the line and cross,power welding, forming the solder joint. Mainly by the welding electrode, welding control system, line and cross wires positioning device
3.The fixed pulling mesh is mainly composed of three parts: pull mesh rack, the pull mesh device and support the pipe of the mesh. The structure is simple and the investment cost is low
4.Welding speed can reach to 80t/min, only need one person to complete the whole process.
Number of electrodes
Line wire space
Cross wire space
Installation and training:
Our company is responsible for equipment installation and commissioning and after-sales service, and technical staff assigned to the scene to install the guidance and debugging work, and customer equipment operation and maintenance of on-site training.
1.In strict accordance with the Jiaoyang provided equipment manuals for operation and maintenance.
2.In strict accordance with the requirements prepare the installation site.
3.Provide the power and water to meet the requirements.
4.Equipment should be used in the workshop, the working environment will directly affect the performance and service life of equipment.
Precautions for use：
1.Before use, check the power connection is solid
2.Welding machine shell must be grounded, the ground is not wet;
3.Adjust the secondary voltage according to the wire diameter, the power switch is turned on;
4.Do not touch the charged body to prevent shock and burn;
5.Check the welding head, spring, rod for damage and loose, timely recovery and repair;
6.After the end of each class to check the electrical control components are normal, such as damage should be replaced and repaired;
7.Mechanical transmission components damaged timely repair. Electrical control section as soon as possible with the manufacturer.
8.Do not open the control box when power is on, do not allow to touch the internal components by hand, to avoid electric shock
9.When checking the internal wiring and control panel wiring, be sure to cut off the power.
10.Do not touch the components inside the control panel, otherwise the components may be damaged.
11.The control box connected to the use of cooling water and ensure adequate flow of cooling water and pressure. Check the cooling system regularly.
12.Regularly (once a month) check the power box wiring.
Equipment warranty for one year, part of the life of equipment maintenance procedures, wearing parts and electronic parts are not covered under warranty.
Equipment failure I will reply within an hour, the first time to the customer site for maintenance
After the warranty, our company provides lifelong after-sales service support, as well as preferential prices to provide equipment components.