Full automatic reinforcing mesh production line

Full automatic reinforcing mesh production line is manufactured by PLC programmable controller. It allows 24 solder joints, no more than 2500mm mesh width and 5-12mm mesh diameter. The length of the reinforcing mesh varies from 3m to 12m. The spacing between horizontal reinforcement and longitudinal reinforcement is 100-300mm. The power supply of our Full automatic reinforcing mesh production line is 2000KVA, and the working frequency is 80-100 /min.

Full automatic reinforcing mesh production line adopts synchronous control technology, welding time and sub - control welding by PLC program system. Touch screens and keyboard input panels make up the form

The operation is more intelligent and reasonable. The biggest advantage of the system is that it can weld more than 30 different grid sizes on the same panel. High and new

The welding transformer efficiency is improved and the wire diameter range is enlarged. Easy to operate, high flexibility, high efficiency, the realization of a perfect welding machine.

1. The reinforcing mesh welding machine adopts synchronous control technology;

2. The sub-control and welding time is composed of PLC program system for operation

3.More intelligent.

4. The time and welding current of each welding transformer can be independently adjusted.

5. The mesh system is controlled by servo motor, which not only improves the precision of mesh size, but also

6. Make sure the distance between the warp and the weft is adjustable.

Note: Special models of reinforcing mesh welding machine can be customized according to customer requirements.