How to solve the problem of China wire fence mesh welding production line fever
1. Check if the insulation of the electrode holder of the fence mesh welding machine is also good, resulting in a part of the short circuit.
2. Check that the pressure of the influent water, the flow rate of the water, and the degree of the supplied water are not suitable. Check whether the procedure of the waterway is blocked by any impurities, which may cause the electrode arm and the electrode tip to be too hot due to the poor cooling effect.
3. Check the copper soft joint and the electrode arm of China wire fence mesh welding production line, and the oxidation of the place where the electrode head touches is not serious, so that the resistance of the touch is strengthened and the heat is severe.
4. Look at the cross section of the electrode tip because there is too much friction, so that the overload has a fever. 5. Check whether the thickness of the welding and the continuous effect of the bearing exceed the standard, so that the overload has a fever.
The China wire fence mesh welding production line adopts synchronous control technology. The sub-control welding and welding time are controlled by digital programming system. The input panel is touch screen or button. The operation is more intelligent and rational, and it has the characteristics of one-time compression and split welding. The welding power is electric, using a stepper motor hopper, the brake motor drives the car to pass through, and the stepping motor drives the trolley to pull the net. Both the warp and the weft are cut off by the straightening machine, the vertical wire is placed manually, and the horizontal wire is automatically dropped.