China Full automatic reinforcing mesh production line made by Jiaoyang adopts the technology of gantry resistance welding machine, synchronously controls the welding frequency, one pressurization, the split welding machine, the welding time is extremely short, and the welding is completed instantaneously. The operating system adopts PLC programming control system, the main equipment control area is concentrated in the host electric cabinet, and the main electric cabinet touch screen control board condition welding speed, welding mesh and the like. The net is equipped with a servo motor planetary reducer, the standard of the net is pulled, and the mesh surface is flat.
The weft blanking of China Full automatic reinforcing mesh production line adopts the stepping motor to control the blanking, the blanking is accurate, and the corresponding steel bar straightening and cutting equipment is equipped. The warp feed is made by circulating the wire and is equipped with a discharge tray device. The upper column for welding and the lower pole block are all made of high-copper copper, which has good electrical conductivity and durability. The welding transformer adopts high-efficiency transformer, and the adjustable range is expanded to 8 levels, which expands the practical range of the machine.
The China Full automatic reinforcing mesh production line adopts the single-sided feeding form. When the welder is working, all the cylinders on the upper arm extend, so that 80 welding electrodes simultaneously press the wire bonding points, and the five transformers sequentially trigger the conduction to complete the welding of one horizontal line. The lower electrodes are mounted on the T-slot plate, and each electrode holder is mounted with two electrodes of 25 mm distance. The T-shaped chute plate and the lower arm are bolted, and the lower arm is in a fixed form. The copper electrode holder is coupled to the two output heads of the welding transformer by a braided copper strip.
China Full automatic reinforcing mesh production line,there is a nut seat between the electrode and the electrode holder, and the height of each lower electrode can be adjusted to facilitate the height adjustment after the lower electrode is worn. Building mesh welding net machine electrode: The upper electrode and the electrode mounting seat are connected by a cone to ensure tight integration, convenient adjustment and replacement. The height of the lower electrode holder is adjustable, which is convenient for electrode repair and adjustment. The upper and lower electrodes have the same specifications, which is easy to install and interchange. The upper and lower electrode materials are all high hardness alloy copper.