Construction Mesh Coil Machine
Introduction and Applications:
1.Construction mesh coil machine is a full automatic mesh production equipment for construction mesh panel/ coil. Line wires are automatic feed from coil wire, cross wires are pre-cut.
2.Construction mesh panel/coil is used to increase the strength of concrete.
1.Line wires are auto. Feed from coil wire, save labors. Cross wires are pre-cut, make sure the evenness of finished mesh.
2.Adopt new type water cooling transformer, compared with traditional transformer, extend the working life.
3.Welding pressure from springs, compared with pneumatic system, it saves production and maintain cost.
4.This machine can produce both mesh panel and mesh coil. Working together with new designed mesh rolling machine, reduce the labor intensity of workers.
5.With PLC control system, easy to operate.
1.Wire payoff 2&3.Line wire straighten 4.Main welding machine 5.Cross wire hopper 6.Mechanical mesh pulling device 7.Mesh cutting machine 8.Mesh support table 9.Mesh rolling machine
Line wire straightening roller Mesh rolling machine Mesh cutting machine
Number of electrodes
Line wire space
Cross wire space
Installation and training:
Our company is responsible for equipment installation and commissioning and after-sales service, and technical staff assigned to the scene to install the guidance and debugging work, and customer equipment operation and maintenance of on-site training.
1.In strict accordance with the Jiaoyang provided equipment manuals for operation and maintenance.
2.In strict accordance with the requirements prepare the installation site.
3.Provide the power and water to meet the requirements.
4.Equipment should be used in the workshop, the working environment will directly affect the performance and service life of equipment.
Precautions for use：
1.Before use, check the power connection is solid
2.Welding machine shell must be grounded, the ground is not wet;
3.Adjust the secondary voltage according to the wire diameter, the power switch is turned on;
4.Do not touch the charged body to prevent shock and burn;
5.Check the welding head, spring, rod for damage and loose, timely recovery and repair;
6.After the end of each class to check the electrical control components are normal, such as damage should be replaced and repaired;
7.Mechanical transmission components damaged timely repair. Electrical control section as soon as possible with the manufacturer.
8.Do not open the control box when power is on, do not allow to touch the internal components by hand, to avoid electric shock
9.When checking the internal wiring and control panel wiring, be sure to cut off the power.
10.Do not touch the components inside the control panel, otherwise the components may be damaged.
11.The control box connected to the use of cooling water and ensure adequate flow of cooling water and pressure. Check the cooling system regularly.
12.Regularly (once a month) check the power box wiring.
Equipment warranty for one year, part of the life of equipment maintenance procedures, wearing parts and electronic parts are not covered under warranty.
Equipment failure I will reply within an hour, the first time to the customer site for maintenance
After the warranty, our company provides lifelong after-sales service support, as well as preferential prices to provide equipment components.