Welcome To Hebei Jiaoyang Wire Mesh Machine Co., Ltd.                    weldingmachine@jiaoyangen.net          +86-318-7063110
You are here: Home » Products » Welding Machines For Construction Mesh » 3D Panel Mesh Machine

Contact Us

Add: no.28 weier road,eastern industrial         zone,anpingcounty,hebei 
E-mail:
weldingmachine@jiaoyangen.net
Tel: +86-318-7063110
Share to:

3D Panel Mesh Machine

Welded wire mesh welding machine is a professionalpiane,It’s compact in structure,easily to operate and with fully functions. This machine is mainly used to produce welded wire meshes and underfloor heating meshes.

  • JIAOYANG
  • Hebei Anping
  • ISO9001
  • L/C,T/T
Quantity:


Introduction and Applications of 3D Panel Mesh Machine:

1.Welded wire mesh welding machine is a professionalpiane,It’s compact in structure,easily to operate and with fully functions.

2.This machine is mainly used to produce welded wire meshes and underfloor heating meshes.

Features of 3D Panel Mesh Machine:

1.Both line and cross wires are fed from coils, which could weld wire mesh sheets or rolls continuously.

2.The horizontal line spacing can be adjusted by a small pickpocket, pull net beam, pull bar and pull net crank

3.Equipped with a small grid device , reduce the mesh feathers, reduce the waste of raw materials.

4.The power of the shaft is provided by the main motor by chain drive and belt drive. The speed of the shaft is 1.7-2.1m / s.

5.Equipped with cross wires straightening runway and fixed length limit device, fixed length after the mechanical cut off, cut off the power of the main motor power.

6.The use of cross wires dropping skateboard and magnetic positioning device to ensure that the blanking position is accurate

7.The welding adopts synchronous power control and separate-control, welding process is controlled synchronously by electric board, high precision, high stability, more solid of welding spots and no burn mark.

8.Both line and cross wires are pulled from pay-off. It is equipped with precise line wires cutting device(Patent No: ZL02208722.2) and axial locating devicePatent No: ZL02208721.4), making the length of line wires consistent and edges neat.

9.The mesh pulling system adopts elastic rodPatent No: ZL200520024380.9and mesh size locating device, making it easy to adjust the mesh aperture with high accuracy.

10.Welding speed can reach to 80t/min, only need one person to complete the whole process.

Technological Processes:

3D panel mesh machine Technological processes.pdf

3D panel mesh machine.jpg

1.Wire payoff   2.Line wire straighten roller   3.Main welding machine   4.Mechanical mesh pulling device   5&6.Mesh cutting machine&store cart      7.Cross wire straightening and feed  8.Mesh rolling machine

Detail Image:

1 Mesh Cutting Machine 2 Mesh Rolling Machine 3 Product

Mesh Cutting Machine                                    Mesh Rolling Machine                                    Product

1.Mesh Cutting Machine:Max.cutting diameter 4.5mm*25pcs wire, Speed:80 times/min, Mechaanical electric cutting

2.Mesh Rolling Machine:Max.mesh weight:150kg, Max.external mesh diameter:500mm

Technical parameters:

Item

GWCD1200A(1.5-2.4)

GWCD1200A(2.3-3.0)

 1

Number of electrodes

25

25

 2

Max.mesh width

1200 mm

1200 mm

 3

Wire diameter

1.5-2.4mm

2.3-3.0mm

 4

Line wire space

50-300 mm

50-300 mm

 5

Cross wire space

50-200mm

50-200 mm

 6

Electric capacity

160KVA

160KVA

 7

Welding speed

80times/min

80times/min

 8

Control system

SCM

SCM


Installation and training:

Our company is responsible for equipment installation and commissioning and after-sales service, and technical staff assigned to the scene to install the guidance and debugging work, and customer equipment operation and maintenance of on-site training.

Equipment maintain:

1.In strict accordance with the Jiaoyang provided equipment manuals for operation and maintenance.

2.In strict accordance with the requirements prepare the installation site.

3.Provide the power and water to meet the requirements.

4.Equipment should be used in the workshop, the working environment will directly affect the performance and service life of equipment.

Precautions for use

1.Before use, check the power connection is solid

2.Welding machine shell must be grounded, the ground is not wet;

3.Adjust the secondary voltage according to the wire diameter, the power switch is turned on;

4.Do not touch the charged body to prevent shock and burn;

5.Check the welding head, spring, rod for damage and loose, timely recovery and repair;

6.After the end of each class to check the electrical control components are normal, such as damage should be replaced and repaired;

7.Mechanical transmission components damaged timely repair. Electrical control section as soon as possible with the manufacturer.

8.Do not open the control box when power is on, do not allow to touch the internal components by hand, to avoid electric shock

9.When checking the internal wiring and control panel wiring, be sure to cut off the power.

10.Do not touch the components inside the control panel, otherwise the components may be damaged.

11.The control box connected to the use of cooling water and ensure adequate flow of cooling water and pressure. Check the cooling system regularly.

12.Regularly (once a month) check the power box wiring.

After-sales service:

Equipment warranty for one year, part of the life of equipment maintenance procedures, wearing parts and electronic parts are not covered under warranty.

Equipment failure I will reply within an hour, the first time to the customer site for maintenance

After the warranty, our company provides lifelong after-sales service support, as well as preferential prices to provide equipment components.

Product Inquiry
HEBEI JIAOYANG WIRE MESH MACHINE CO.,LTD

Add: no.28 weier road,eastern industrial zone,anpingcounty,hebei 
Email:
weldingmachine@jiaoyangen.net
Tel: +86-318-7063110

Copyright
 2017 Hebei Jiaoyang Wire Mesh Machine Co., Ltd.  All rights reserved.
Support by 
Rongchuangmedia  

Quick Navigation

Product Category